72 lines
2.5 KiB
Go
72 lines
2.5 KiB
Go
// Copyright 2022 The Periph Authors. All rights reserved.
|
|
// Use of this source code is governed under the Apache License, Version 2.0
|
|
// that can be found in the LICENSE file.
|
|
|
|
// This file contains pin mapping information that is specific to the Allwinner
|
|
// H5 model.
|
|
|
|
package allwinner
|
|
|
|
import (
|
|
"fmt"
|
|
"strings"
|
|
|
|
"periph.io/x/conn/v3/pin"
|
|
"periph.io/x/host/v3/sysfs"
|
|
)
|
|
|
|
// mappingH6 describes the mapping of the H5 processor gpios to their
|
|
// alternate functions.
|
|
//
|
|
// It omits the in & out functions which are available on all gpio.
|
|
//
|
|
// The mapping comes from the datasheet page 26:
|
|
// https://linux-sunxi.org/images/3/30/H616_Datasheet_V1.0.pdf
|
|
//
|
|
// - The datasheet uses TWI instead of I2C but it is renamed here for
|
|
// consistency.
|
|
// - RGMII means Reduced gigabit media-independent interface.
|
|
// - SDC means SDCard?
|
|
// - NAND connects to a NAND flash controller.
|
|
// - CSI and CCI are for video capture.
|
|
var mappingH6 = map[string][5]pin.Func{
|
|
"PC0": {"NAND_WE", "SDC2_DS", "SPI0_CLK", "", "PA_EINT0"},
|
|
"PC1": {"NAND_ALE", "SDC2_RST", "", "", "PA_EINT1"},
|
|
"PC2": {"NAND_CLE", "", "SPI0_MOSI", "", "PA_EINT2"},
|
|
"PC3": {"NAND_CE1", "", "SPI0_CS0", "BOOT_SEL1", "PA_EINT3"},
|
|
"PC4": {"NAND_CE0", "", "SPI0_MIS0", "BOOT_SEL2", "PA_EINT4"},
|
|
"PC5": {"NAND_RE", "SDC2_CLK", "", "BOOT_SEL3", "PA_EINT5"},
|
|
"PC6": {"NAND_RB0", "SDC2_CMD", "", "BOOT_SEL4", "PA_EINT6"},
|
|
"PC7": {"NAND_RB1", "", "SPI0_CS1", "", "PA_EINT7"},
|
|
"PC8": {"NAND_DQ7", "SDC2_D3", "", "", "PA_EINT8"},
|
|
|
|
"PC9": {"NAND_DQ6", "SDC2_D4", "", "", "PA_EINT9"},
|
|
"PC10": {"NAND_DQ5", "SDC2_D0", "", "", "PA_EINT10"},
|
|
"PC11": {"NAND_DQ4", "SDC2_D5", "", "", "PA_EINT11"},
|
|
"PC12": {"NAND_DQS", "", "", "", "PA_EINT12"},
|
|
"PC13": {"NAND_DQ3", "SDC2_D1", "", "", "PA_EINT13"},
|
|
"PC14": {"NAND_DQ2", "SDC2_D6", "", "", "PA_EINT14"},
|
|
"PC15": {"NAND_DQ1", "SDC2_D1", "SPI0_WP", "", "PA_EINT15"},
|
|
"PC16": {"NAND_DQ0", "SDC2_D7", "SPI0_HOLD", "", "PA_EINT16"},
|
|
}
|
|
|
|
// mapH6Pins uses mappingH6 to actually set the altFunc fields of all gpio
|
|
// and mark them as available.
|
|
//
|
|
// It is called by the generic allwinner processor code if an H6 is detected.
|
|
func mapH6Pins() error {
|
|
fmt.Println("Initializing H6 pins.")
|
|
for name, altFuncs := range mappingH6 {
|
|
pin := cpupins[name]
|
|
pin.altFunc = altFuncs
|
|
pin.available = true
|
|
if strings.Contains(string(altFuncs[4]), "_EINT") {
|
|
pin.supportEdge = true
|
|
}
|
|
|
|
// Initializes the sysfs corresponding pin right away.
|
|
pin.sysfsPin = sysfs.Pins[pin.Number()]
|
|
}
|
|
return nil
|
|
}
|